Table of Contents
Advertisement
Filter
(Low) Key
[C–1...G9]
This sets the breakpoint note between the two lower slopes—the "hinge" of the lower door.
The Low Key can't be set above the Mid Key.
Low-Mid Slope
[–Inf, –12.00...+12.00, +Inf]
This sets the slope between the Low and Mid keys. For normal key track, use negative values. -1.00 is the default.
Mid Key
[C–1...G9]
This sets the center of the keyboard tracking—the main "hinge." When this key is played, the Key Track output is 0.
The Mid Key can't be set below the Low Key, or above the High Key.
Mid-High Slope
[–Inf, –12.00...+12.00, +Inf]
This sets the slope between the Mid and High keys. For normal key track, use positive values. +1.00 is the default.
High Key
[C–1...G9]
This sets the breakpoint note between the two higher slopes—the "hinge" of the upper door.
The High Key can't be set below the Mid Key.
(High) Slope
[–Inf, –12.00...+12.00, +Inf]
This sets the slope between the High key and the top of the MIDI note range. For normal key track, use positive values.
+1.00 is the default.
42
Advertisement
Table of Contents
