ElectrIQ Compact V2 User Manual page 8

4. Make sure the unit is upright and there are no
obstructions to the air inlets and outlet grill. The
unit should be positioned at least 50cm away from
walls or other objects within the room.
Note: The window kit is only designed to be installed with sliding or sash windows or
doors. The window kit is not designed or to be used with any other style of windows.
However the fish tail adaptor can be used with most windows / doors. When using the
cooling mode ensure that the opening left is as small as possible. The best form of
installation is through a wall duct. Please note that the unit will need to be vented outside.
IMPORTANT SAFEGUARDS
The length of the soft hose extends from 28 cm to 150 cm. If hose is extended above this
length the unit may malfunction and this can invalidate the warranty.
The outlet vent must be well ventilated and not
obstructed as this will cause the unit to overheat.
Avoid bending the air hose more than 30
degrees.
If the unit does not reach the desired venting point it may be installed on a flat surface
such as a table, although precautions should be taken to ensure the unit is not at risk of
falling.
5. Fix the other end of the hose
Page 8 of 16
to the air-outlet window kit