Electrolux ESL5321LO User Manual page 10

10 www.electrolux.com
How to deactivate the rinse aid
empty notification
Make sure the appliance is in user mode.
1. Press
The indicators:
off. The indicator
The indicator
setting. If on = rinse aid empty
notification is on, if off = rinse aid empty
notification is off.
2. Press
3. Press on/off to confirm and save the
setting.
6.4 Acoustic signals
Acoustic signals sound when a
malfunction of the appliance occurs. It is
not possible to deactivate these acoustic
signals.
There is also an acoustic signal that
sounds when the programme is
completed. By default this acoustic signal
is deactivated but it is possible to
activate it.
How to activate the acoustic
signal at the end of a
programme
Make sure the appliance is in user mode.
1. Press
The indicators:
off. The indicator
The indicator
setting. If on = the acoustic signal is
active. If off = the acoustic signal is
disabled.
2. Press
3. Press on/off to confirm and save the
setting.
6.5 AirDry
AirDry improves the drying results with
less energy consumption.
.
, , and
still flashes.
shows the current
to change the setting.
.
, and
still flashes.
shows the current
to change the setting.
are
During the drying phase, the
door opens automatically
and remains ajar.
CAUTION!
Do not try to close the
appliance door within 2
minutes after automatic
opening. This can cause
damage to the appliance.
AirDry is automatically activated with all
programmes excluding
To improve the drying performance refer
to the XtraDry option or activate AirDry.
CAUTION!
If children have access to
the appliance, it is advised to
deactivate AirDry as opening
the door may pose a danger.
How to deactivate AirDry
are
Make sure the appliance is in user mode.
1. Press
The indicators:
The indicator
The indicator
setting. If on = AirDry is on, if off = AirDry
is off.
2. Press
3. Press on/off to confirm and save the
setting.
.
.
, ,
still flashes.
indicates the current
to change the setting.
are off.