Checking information
You can check information in the "Standard menu" and
in the "Extended menu". They differ in the extent of the
information displayed.
Checking information in the "Standard menu"
Press the following buttons:
1.
repeatedly until the "standard menu" is dis-
ä
played.
2.
/
for "Information".
|
~
3.
to confirm.
d
The following checking options are now available.
Checking information in the "Standard menu":
■
Outside temperature
"Heating" submenu:
■
–
Set flow temperature
Actual flow temperature
–
–
Heating circuit pump
–
Valve
–
Operating program
–
Operating status
Checking information in the "Extended menu"
Press the following buttons:
1.
for the "Extended menu".
å
2.
/
for "Information".
|
~
3.
to confirm.
d
The following checking options are now available.
If you call up the "Heating" submenu, you can check
information on the required heating circuit via "
"DHW" submenu:
■
–
Set DHW temperature
Actual DHW temperature
–
–
Set return temperature
Actual return temperature
–
–
Pump
Valve
–
–
Operating program
–
Operating status
■
"Solar" submenu:
–
Solar DHW
Collector temperature
–
–
Solar energy
Solar circuit pump (speed, hours run)
–
–
Reheating suppression
Checking information in the "Extended menu":
"General" submenu:
■
–
Outside temperature
Set system temperature
–
–
Enable additional boiler
Time
–
–
Date
"Boiler" submenu:
■
–
Boiler water temperature
–
Boiler return
–
Flue gas temperature
–
Flue gas residual oxygen
Primary air damper
–
–
Secondary air damper
Boiler pump
–
–
Boiler valve
Flue gas fan
–
–
Feed screw conveyor
Fuel consumption
–
–
Ash box
Boiler start
–
–
Hours run
Checks
/
".
Ù
Ú
39