Room Temperature; Heating Circuit - Viessmann VITOLIGNO 300-H Series Operating Instructions Manual

Room temperature

Required settings
The following settings are required for central heating:
■ Select heating circuit: See page 17.
■ Setting room temperature: See page 17.
Selecting a heating circuit
The heating of your interior can be split over several
heating circuits.
In the case of heating systems with several heating
■
circuits, for all central heating settings, first select the
heating circuit where you want to make a change.
■ This selection is not possible in heating systems with
only one heating circuit.

Heating circuit 1

Set room temp.
Heating program
Party mode
Economy mode
Select with
Fig. 11
The heating circuits are marked at the factory as
"Heating circuit 1" (HC1) and "Heating circuit 2"
(HC2).
Setting the standard room temperature
Press the following buttons:
1. repeatedly until the "standard menu" is dis-
ä
played.
2. / to select "Heating".
| ~
3. to confirm.
d
4. / to select "Heating circuit 1" (HC1), "Heat-
Ù Ú
ing circuit 2" (HC2), "Heating circuit 3"
(HC3) or "Heating circuit 4" (HC4, if instal-
led).
HC1
HC1 Htg circuit selection
Ù Ú
21 °C
Ú
ß
(
Setting operating program: See page 18.
■
■ Setting time program: See page 18.
Setting
Example:
"Heating circuit 1" is the heating circuit for the
■
rooms occupied by you.
■ "Heating circuit 2" is the heating circuit for the
rooms of a separate apartment.
Ù
Heating circuit 2
Was selected
If you or your heating contractor have renamed the
heating circuits (e.g. to "Apartment" or similar), that
name is shown in place of "Heating circuit 1". See
page 35.
5. / for "Set room temp".
| ~
6. to confirm.
d
7. / for the required temperature.
| ~
8. to confirm.
d
"Adopted" appears briefly in the dialogue
line of the display.
Central heating
HC2
HC2
Ú
17