Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Rongta Technology PL-2303
Summary of Contents for Rongta Technology PL-2303
- Page 1 Mobile Printer Driver Setup Manual...
- Page 2 Xiamen Rongta Technology Co., Ltd. I. USB to Serial Driver Installation Open the file from the CD. Double click the installation icon Then, it will show as below picture: Select “Next”, it will show as below picture: Click “Finish”, the USB to Serial Driver is installed.
-
Page 3: Windows Driver Installation
Xiamen Rongta Technology Co., Ltd. Firstly, if you want to connect the Mobile Printer to computer, please connect the printer to computer by the USB Data Wire. Turn on the computer power. Then you can see the COM number from the lower right corner of the computer desktop. Then you can install the Windows Driver. - Page 4 Xiamen Rongta Technology Co., Ltd. Then, it will show as below picture: Select the Printer Model and available computer port, such as "RongtaUSB PORT" as the picture, then, click “Install”. Adding “Print Port”, if you need to select the corresponding IP port, but the default menu which is drop-down from “Configure port”...
- Page 5 Xiamen Rongta Technology Co., Ltd. Select “OK”, and then click “Exit”. Wait until it shows the below picture, it means, the printer driver has been installed successfully. Then click “Finish” to finish driver installation. www.rongtatech.com...
- Page 6 Xiamen Rongta Technology Co., Ltd. III. Printer Setup and Testing 2.1 Setup Printer Properties Click Start Menu, and then click “Devices and Printers”, just as above picture Right-Click “RONGTA RPP02 Series Printer” and then click “Printer properties” And then, it will show as below picture:...
-
Page 7: Serial Port Configuration
Xiamen Rongta Technology Co., Ltd. On RONGTA RPP02 Series Printer Properties “General”, you could configure the printer communication port, such as Serial port, Parallel port and USB port. You also could set the paper specification, beeper etc. After all the setting, you could start to print the testing page. - Page 8 Xiamen Rongta Technology Co., Ltd. Select available computer COM port, such as "COM1" as the above picture, and then click "Configure Port" to set the detailed parameter. www.rongtatech.com...
- Page 9 Xiamen Rongta Technology Co., Ltd. "Bit per second" means Serial port baud rate, it must same as printer setting. For example, if printer baud rate is "19200bsp", then you must select "19200" on "Bit per second", just as above picture.（Factory default baud rate is 19200bps）...
Need help?
Do you have a question about the PL-2303 and is the answer not in the manual?
Questions and answers