Rongta Technology RP325 Command Set
  1. Manuals
  2. Brands
  3. Rongta Technology Manuals
  4. Printer
  5. RP325
  6. Command set

Rongta Technology RP325 Command Set

Thermal receipt printer
Hide thumbs Also See for RP325:
Table of Contents

Advertisement

Quick Links

Download this manual
Thermal Receipt Printer
RP325\RP326\RP327\RP328
Command Set
Ro n g t a Te ch n o l o g y (X i a m e n ) Gr o u p Co . , Lt d.
www.rongtatech.com
V1.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RP325 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Rongta Technology RP325

Summary of Contents for Rongta Technology RP325

  • Page 1 Thermal Receipt Printer RP325\RP326\RP327\RP328 Command Set Ro n g t a Te ch n o l o g y (X i a m e n ) Gr o u p Co . , Lt d. www.rongtatech.com V1.0...

  • Page 2: Table Of Contents

    Table of Contents Command List...............................4 Control Commands............................6 HT................................... 6 LF..................................6 CR...................................6 DLE EOT n..............................7 DLE ENQ n..............................9 DLE DC4 n m t............................10 ESC SP n..............................11 ESC ! n................................ 11 ESC $ nL nH...............................12 ESC % n..............................12 ESC &...
  • Page 3 GS（H pl pH fn m d1 d2 d3 d4 (fn=48)....................37 GS H n................................. 37 GS L nL nH..............................38 ①GS V m ② GS V m n..........................38 GS W nL nH..............................39 GS :................................40 GS ^ r t m..............................41 GS a n................................42 GS f n................................42 GS h n................................43...

  • Page 4: Command List

    Command List Type Command Name Print and line feed Print and carriage return JMP to the next TAB position Print ESC D n Set horizontal tab positions Command ESC J n Print and Feed n dots paper ESC d n Print and Feed n lines ESC = n Select peripheral device...
  • Page 5 GS v Print raster bit image FS p n m Print NV bitmap FS q n Define NV bitmap Init Command ESC @ Initialize printer DLE EOT n Transmit real-time status DLE ENQ n Send real-time request to printer DLE DC4 n m t Generate pulse in real-time Status GS r n...

  • Page 6: Control Commands

    GS c Print counter GS P Set horizontal and vertical motion unit Control Commands [Name] Horizontal tab [Format] ASCII Decimal [Description] Moves the print position to the next horizontal tab position. [Notes] This command is ignored unless the next horizontal tab position ...

  • Page 7: Dle Eot N

    Decimal [Description] When automatic line feed is enabled, this command functions the same as LF; when automatic line feed is disabled, this command is ignored. [Notes]  With a serial interface, the command performs as if auto line feed is disabled.
  • Page 8  With a parallel interface model, this command cannot be executed when the printer is busy. This command is executed even when the printer is offline or in error status, with a parallel interface model.  When Auto Status Back (ASB) is enabled using the GS a command, the status transmitted by the DLE EOT command and the ASB status must be differentiated.

  • Page 9: Dle Enq N

    Auto recoverable error occurred. Not used. Fixed to Off. Bit 6: Bit 6 is On when printing is stopped due to high print head temperature until the print head temperature drops sufficiently or when the paper roll cover is opened during printing. n = 4: Continuous paper sensor status Off/On Decimal...

  • Page 10: Dle Dc4 N M T

    Example: If you attempt to transmit ESC 3 n to the printer, but DTR (DSR for the host computer) goes to MARK before n is transmitted, and DLE ENQ 2 interrupts before n is received, the code <10>H for DLE ENQ 2 is processed as the code for ESC 3 <10>H. ...

  • Page 11: Esc Sp N

    ESC SP n [Name] Set right-side character spacing [Format] ASCII ESC SP Decimal 27 [Range] 0  n  255 Sets the right-side character spacing to [nX0.125mm] [Description]  The right-side character spacing for double-width mode is twice the [Notes] normal value.

  • Page 12: Esc $ Nl Nh

     When some characters in a line are double or more height, all the characters in the line are aligned at the baseline.  ESC M can also select character font type. However, the setting of the last received command is effective. ...

  • Page 13: Esc & Y C1 C2 [X1 D1

    character set is automatically selected.  n is available only for the least significant bit. [Default] n = 0 [Reference] ESC &, ESC ? ESC & y c1 c2 [x1 d1...d(y x1)]...[xk d1...d(y xk)]   [Name] Define user-defined characters [Format] ASCII &...
  • Page 14 the most significant bit of the 3rd byte of data in vertical direction is effective. [Default] The internal character set [Reference] ESC %, ESC ? [Example]  When Font A (12x 24) is selected. <0F>H <30>H <40>H ..d2 = <03>H d5 = <80>H d8 = <40>H .
  • Page 15  When font B (9¬17) is selected. d1 = <1F>H d4 = <08>H d7 = <10>H... d2 = <FF>H d5 = <08>H d8 = <04>H... d3 = <80>H d6 = <00>H d9 = <00>H...

  • Page 16: Esc M Nl Nh D1

    ESC  m nL nH d1...dk [Name] Select bit-image mode [Format] ASCII m nL nH d1...dk  m nL nH d1...dk Decimal 27 42 m nH d1...dk [Range] m = 0, 1, 32, 33 0  nL  255 0  nH  3 0 ...
  • Page 17  This command is not affected by print modes (emphasized, double-strike, underline, character size, or white/black reverse printing), except upside-down print mode.  The relationship between the image data and the dots to be printed is described in Figure 3.11.3. When 8-dot bit image is selected: Figure 3.11.3.

  • Page 18: Esc - N

    When 24-dot bit image is selected: Figure 3.11.3. ESC - n [Name] Turn underline mode on/off [Format] ASCII Decimal [Range] 0  n  2, 48  n  50 [Description] Turns underline mode on or off using n as follows: Function 0, 48 Turns off underline mode...

  • Page 19: Esc 2

    48, the following data is not underlined, and the underline thickness set before the mode is turned off does not change. The default underline thickness is 1 dot.  Changing the character size does not affect the current underline thickness. ...

  • Page 20: Esc

    corresponding patterns for the internal characters are printed.  This command deletes the pattern defined for the specified code in the font selected by ESC !. If a user-defined characters have not been defined, the printer ignores this command. [Reference] ESC &, ESC % ESC @ [Name]...

  • Page 21: Esc E N

    position from the beginning of the line.  k indicates the total number of horizontal tab positions to be set. [Notes]  The horizontal tab position is stored as a value of [character width  measured from the beginning of the line. The character width includes the right-side character spacing, and double-width characters are selected with twice the width of normal characters.

  • Page 22: Esc J N

    n Decimal [Range] 0  n  255 [Description] Turns double-strike mode on or off.  When the LSB of n is 0, double-strike mode is turned off.  When the LSB of n is 1, double-strike mode is turned on.

  • Page 23: Esc R N

    ESC R n [Name] Select an international character set [Format] ASCII 52 n Decimal 27 82 n [Range] 0  n  15 Selects an international character set n as follows: : [Description] Character set U.S.A France Germany Denmark I Sweden Italy Spain I...

  • Page 24: Esc \ Nl Nh

    clockwise-rotated characters. Double-width and double-height commands in 90 rotation mode enlarge characters in the opposite directions from double-height and double- width commands in normal mode. [Default] n = 0 [Reference] ESC !, ESC  ESC \ nL nH [Name] Set relative print position [Format] ASCII nH Decimal...

  • Page 25: Esc C 5 N

    2, 50 Right justification [Notes]  The command is enabled only when processed at the beginning of the line in standard mode.  This command executes justification in the printing area. This command justifies the space area according to HT, ESC $ or ESC \.

  • Page 26: Esc P M T 1 T 2

     The maximum paper feed amount is 1016 mm (40 inches). If the paper feed amount (n  line spacing) of more than 1016 mm (40 inches) is specified, the printer feeds the paper only 1016 mm (40 inches). Even when the set value exceeds the maximum with the BM sensor enabled in standard mode, this command is effective.

  • Page 27: Esc { N

    CP755 [East Europe，Latvian 2] WCP1258[Vietnam] Iran ISO-8859-2[Latin 2] reserve ISO-8859-3[Latin 3] reserve ISO-8859-4[Baltic] reserve ISO-8859-5[Cyrillic] reserve ISO-8859-6[Arabic] CP862 [Hebrew] ISO-8859-7[Greek] WCP1252 Latin I ISO-8859-8[Hebrew] WCP1253 [Greek] ISO-8859-9[Turkish] CP852 [Latina 2] ISO-8859-15 [Latin 3] Thai2 CP858 Multilingual Latin Ⅰ+Euro) Iran II CP856 Latvian Cp874...

  • Page 28: Esc I (For Cut)

    ESC i (for cut) [Name] partial cut paper [Format] ASCII i Hex Decimal [Description] ESC m select a paper cutting mode and then partial cut the paper. ESC m (for cut) [Name] partial cut paper [Format] ASCII m Hex Decimal [Description] ESC m select a paper cutting mode and then partial cut the paper.

  • Page 29: Fs P N M

    FS p n m [Name] Print NV bit image [Format] ASCII Decimal [Range] 1  n  255 0  m  3 , 48  m  51 [Description] Prints NV bit image n using the mode specified by m. Mode Vertical Dot Density Horizontal Dot Density...

  • Page 30: Fs Q N [Xl Xh Yl Yh D1

    as normal data. [References] ESC , FS q, GS /, GS v 0 FS q n [xL xH yL yH d1...dk]1...[xL xH yL yH d1...dk]n [Name] Define NV bit image [Format] ASCII [xL xH yL yH d1...dk]1...[ xL xH yL yH d1...dk]n 71 n [xL xH yL yH d1...dk]1...[ xL xH yL...
  • Page 31 time commands, during the execution of this command.  NV bit image is a bit image defined in non-volatile memory by FS q and printed by FS p.  In standard mode, this command is effective only when processed at the beginning of the line. This command is effective when 7 bytes <FSyH>...
  • Page 32 does not perform printing. Printing of the NV bit image is performed by the FS p command. FS p [Reference] 当 xL = 64, xH = 0, yL = 96, yH = 0 [Example]...

  • Page 33: Gs ! N

    GS ! n [Name] Select character size [Format] ASCII 21 n Decimal [Range] 0  n  255 (1  Enlargement in vertical direction  8, 1  Enlargement in horizontal direction  8) [Description] Selects the character height using bits 0 to 2 and selects the character width using bits 4 to 7, as follows: Off/On Decimal...

  • Page 34: Gs * X Y D1

    [Default] n = 0 ESC ! [Reference] GS * x y d1…d(x ¬ ¬ [Name] Define downloaded bit image [Format] ASCII  d1...d(xxyx8) Hex 1D 2A x d1...d(xxyx8) Decimal d1 ...d(xxyx8) [Range] 1  x  255 48 (where xxy 1536) 0 ...

  • Page 35: Gs / M

    GS / m [Name] Print downloaded bit image [Format] ASCII m Decimal [Range] 0  m  3, 48  m  51 [Description] Prints a downloaded bit image using the mode specified by m. m selects a mode from the table below: Mode Vertical Dot Density Horizontal Dot Density...

  • Page 36: Gs B N

    GS B n [Name] Turn white/black reverse printing mode [Format] ASCII Decimal [Range] 0  n  255 [Description] Turns white/black reverse print mode on or off.  When the LSB of n is 0, white/black reverse mode is turned off. ...

  • Page 37: Gs（H Pl Ph Fn M D1 D2 D3 D4 (Fn=48)

    Not used Fixed  the information B that can be specified is as follows: Type of printer information Contents Firmware version Depends on firmware version Manufacturer “EPOSN” Printer name “TM-T88V” Serial number Depends on serial number Type of mounted additional Japanese model: ”KANJI JAPANESE”...

  • Page 38: Gs L Nl Nh

    [Notes]  HRI characters are printed using the font specified by GS f. [Default] n = 0 [Reference] GS f, GS k GS L nL nH [Name] Set left margin [Format] ASCII nH Decimal 29 [Range] 0  nL  255 0 ...

  • Page 39: Gs W Nl Nh

    [Notes for ① and ②]  Cutting status is different, depending on the installed auto cutter type.  This command is effective only when processed at the beginning of a line. [Note for ① ]  Only the partial cut is available; there is no full cut. [Notes for ②] ...
  • Page 40 If the printing area width cannot be extended sufficiently, reduce the left margin to accommodate one character. [Default] If the printing area width cannot be extended sufficiently, reduce the right space.  If the width set for the printing area is less than one vertical line, the following processing is performed only on the line in question when data other than character data (e.g., bit image, user-defined bit image) is developed: ①Extend the printing area width to the right to accommodate one...

  • Page 41: Gs ^ R T M

     When GS ^ is received during macro definition, the printer ends macro definition and clears the definition.  Macro is not defined when the power is turned on.  The defined contents of the macro are not cleared by ESC @. Therefore, ESC @ can be included in the contents of the macro definition.

  • Page 42: Gs A N

    GS a n [Name] Enable/Disable Automatic Status Back (ASB) [Format] ASCII n Decimal [Range] 0  n  255 [Description] Enables or disables ASB, and specifies the status items to include, using n as follows: Off/On Decimal Status for ASB Undefined .

  • Page 43: Gs H N

    Font 0,48 Font A (12x24) 1,49 Font B (9x17) [Notes]  HRI indicates Human Readable Interpretation.  HRI characters are printed at the position specified by GS H. [Default] n = 0 GS H, GS k [Reference] GS h n [Name] Select bar code height [Format]...
  • Page 44 43, 45, 46, 47, 58 UPC-A 11  n  12 48  d  57 ② UPC-E 11  n  12 48  d  57 JAN13 (EAN13) 12  n  13 48  d  57 JAN 8 (EAN8) 7 ...
  • Page 45 the beginning of the line. This command is not affected by print modes (emphasized, double-strike, underline, character size, white/black reverse printing, or 90 rotated character, etc.), except for upside-down printing mode. When using thermal label: If the height of bar code is not fit for current label, the exceeded ...
  • Page 46 into account for data transmission: ①The top of the bar code data string must be the code set selection character (CODE A, CODE B, or CODE C), which selects the first code set. ②Special characters are defined by combining two characters "{" and one character.

  • Page 47: Gs R N

    GS r n [Name] Transmit status [Format] ASCII Decimal [Range] n = 1, 49 [Description] Transmits the status specified by n as follows: Function 1, 49 Transmits paper sensor status [Notes]  When using a serial interface When DTR/DSR control is selected, the printer transmits only 1 byte after confirming the host is ready to receive data (DSR signal is SPACE).

  • Page 48: Gs V 0 M Xl Xh Yl Yh D1

    GS v 0 m xL xH yL yH d1..dk [Name] Print raster bit image [Format] ASCII d1...dk d1...dk Decimal 118 48 xL xH d1...dk [Range] 0 m  3, 48 m  51 0  xL  255 0  xH  255 where 1  (xL + xH¬256)  128 0 ...

  • Page 49: Gs W N

    printer ends macro definition, and begins performing this command. The definition of this command should be cleared.  d indicates the bit-image data. Setting a bit to 1 prints a dot and setting it to 0 does not print a dot. [Example] When xL+xHx256=64 (xL + xHx256)x8dots=512dots...

  • Page 50: Gs X N

    GS x n [Name] Set barcode printing left space [Format] ASCII 78 n Decimal [Description] The print bar code staring positions is: 0255 GS P x y [Name] Set horizontal and vertical motion unit [Format] ASCII : GS P Hex : y Decimal : [Range] ...

  • Page 51: Fs - N

    Undefined. － － － Undefined. － － － Underline mode is OFF. Underline mode is ON. [Notes]  When both double-width and double-height modes are set (including right- and left-side character spacing), quadruple-size characters are printed.  The printer can underline all characters (including right- and left- side character spacing), but cannot underline the space set by HT and 90°...

  • Page 52: Fs 2 C1 C2 D1

    the following values of n. Function 0, 48 Turns off underline mode for Kanji characters 1, 49 Turns on underline mode for Kanji characters (1-dot thick) 2, 50 Turns on underline mode for Kanji characters (2-dot thick) [Notes] The printer can underline all characters (including right- and left-side Character spacing), but cannot underline the space set by HT and 90°...
  • Page 53 [Notes]  c1 and c2 indicate character codes for the defined characters. c1 specifies for the first byte, and c2 for the second byte. d indicates the dot data. Set a corresponding bit to 1 to print a dot or to 0 to not print a dot. ...

  • Page 54: Esc = N

    ESC = n [Name] Set peripheral device ASCII n Decimal [Description] Set peripheral device ： bit0：00 printer disable； 01 printer enable. bit1-7：undefined FS S n1 n2 [Name] Set spacing for full-width Kanji character [Format] ASCII n1 n2 n2 Decimal [Range] 0 ...

  • Page 55: Esc Ff

    [Name] Print and return to standard mode in page mode [Format] ASCII Decimal [Description] Prints the data in the print buffer collectively and returns to standard mode. [Notes]  This command is enabled only in page mode. The buffer data is deleted after being printed. The printing area set by ESC W is reset to the default setting.

  • Page 56: Esc S

     This command sets the position where data is buffered to the position specified by ESC T within the printing area defined by ESC W.  This command switches the settings for the following commands (in which the values can be set independently in standard mode and page mode) to those for page mode: Set right-side character spacing: ESC SP ...

  • Page 57: Esc T N

    ESC T n [Name] Select print direction in page mode [Format] ASCII Decimal 27 [Range] 0  n  3 48  n  51 [Description] Selects the print direction and starting position in page mode. n specifies the print direction and starting position as follows: Print Direction Starting Position...

  • Page 58: Esc W Xl Xh Yl Yh Dxl Dxh Dyl Dyh

    ESC W xL xH yL yH dxL dxH dyL dyH [Name] Set printing area in page mode [Format] ASC II W xL xH yL yH dxL dxH dyL dyH Hex 1B 57 xL xH yL dyH Decimal yH dxL dxH dyL [Range] 0 ...

  • Page 59: Esc Z M N K Dl Dh D1

    CAN, ESC L, ESC T [Reference] ESC Z m n k dL dH d1…dn [Name] Print 2D barcode [Format] ASC II m n k dL dH d1…dn m n k dL dH d1…dn Decimal 90 m n k dL dH d1…dn [Application] M16C/ARM version printers.

  • Page 60: Fs W N

    《Table for QR-CODE size(version)》 Version Capacity(Code words)by EC level L(7%) M(15%) Q(25%) H(30%) FS W n [Name] Turn quadruple-size mode on/off for Kanji characters [Format] ASCII FS n Decimal [Range] 0  n  255 [Description] Turns quadruple-size mode on or off for Kanji characters. ...

  • Page 61: Gs Ff

    character. FS ! or GS ! can also select and cancel quadruple-size mode by selecting double-height and double-width modes, and the setting of the last received command is effective. [Default] n = 0 [Reference] FS !, GS ! GS FF [Name] Feed marked paper to print starting position [Format]...
  • Page 62 When the starting position is set to the upper right or lower left,  this command sets the absolute position in the horizontal direction. ESC $, ESC T, ESC W, ESC \, GS \ [Reference] GS ( A pL pH n m [Name] Execute test print [Format]...

  • Page 63: Gs C 0 N M

    GS C 0 n m [Name] Select counter print mode [Format] ASCII 30 n Decimal 48 n [Range] 0  n  5 0  m  2, 48  m  50 [Description] Selects a print mode for the serial number counter. n specifies the number of digits to be printed as follows: When n = 0, the printer prints the actual digits indicated by the number value.

  • Page 64: Gs C 2 Nl Nh

    [Description] Selects a count mode for the serial number counter.  aL, aH or bL, bH specify the counter range.  n indicates the stepping amount when counting up or down.  r indicates the repetition number when the counter value is fixed.

  • Page 65: Gs C ; Sa ; Sb ; Sn; Sr; Sc

    GS C ; sa ; sb ; sn; sr; sc; [Name] Select count mode (B) [Format] ASCII sb ; ; Hex 1D 4 [Range] “0”  sa  “65535” “0”  sb  “65535” “0”  sn  “255” “0”  sr  “255” “0”...

  • Page 66: Gs Z N

    GS Z n [Name] Select 2D barcode type [Format] ASCII n Decimal 27 [Range] n=0 ：PDF417(default) n=1 ：QR-CODE [Application] M16C/ARM version printers GS \ nL nH [Name] Set relative vertical print position in page mode [Format] ASCII 5C nL nH Decimal 92 nL [Range] 0 ...

  • Page 67: Gs C

    GS c [Name] Print counter [Format] ASCII c Hex Decimal [Description] Sets the serial counter value in the print buffer and increments or decrements the counter value. [Notes]  After setting the current counter value in the print buffer as print data (a character string), the printer counts up or down based on the count mode set.
  • Page 68 Page0 PC437 Page3 CP860 [Portuguese] Code page 437 _0 _1 _2 _3 _4 _5 _6 _7 _8 _9 _A _B _C _D _E _F ² ù ä Þ à Ü á â å æ ã ï î ì ° ± ´...
  • Page 69 Page2 PC850[Multilingual] Code page 850 _0 _1 _2 _3 _4 _5 _6 _7 _8 _9 _A _B _C _D _E _F ² ù ä Þ à Ü á â å æ ã ï î ì ° ± ´ Å ¿ ó õ ñ ø ö û Ö Ú È £ Â Á ƒ á...
  • Page 70 Page4 PC863[Canadian-French] Code page 863 _0 _1 _2 _3 _4 _5 _6 _7 _8 _9 _A _B _C _D _E _F ² ù ä Þ ® Ü µ â å æ ã ï î ― ¬ κ ´ ³ µ ó ¶ Ï ø ö ι Ô Ú ¢ £ × Ù ƒ ¦...
  • Page 71 Page6 pc1251 [Cyrillic] Code page 1251 _0 _1 _2 _3 _4 _5 _6 _7 _8 _9 _A _B _C _D _E _F Ϗ ϐ ‖ А „ „ “ ” € ‟ Љ ‹ Њ Ќ Ћ Ў Џ ‘ ’ ‚ ‛ • – — ™...
  • Page 72 Page8 MIK[Cyrillic /Bulgarian] Code page MIK _0 _1 _2 _3 _4 _5 _6 _7 _8 _9 _A _B _C _D _E _F А Б В Г Д Е Ж З И Й К Л М Н О П Р С Т У Ф Х Ц Ч Ш Щ Ъ Ы Ь Э Ю Я а...
  • Page 73 Page10 Iran Code page Iran _0 _1 _2 _3 _4 _5 _6 _7 _8 _9 _A _B _C _D _E _F ‫ﺍ‬ ‫ﺁ‬ ‫ﺋ‬ 。 ‫ﺍ‬ ‫ﺎ‬ ‫ﺏ‬ ‫ﺑ‬ ‫ﭖ‬ ‫ﭘ‬ ‫ﺕ‬ ‫ﺗ‬ ‫ﺙ‬ ‫ﺛ‬ ‫ﺝ‬ ‫ﺟ‬ ‫ﭺ‬ ‫ﭼ‬ ‫ﺡ‬ ‫ﺣ‬...
  • Page 74 Page 16 PC1252 Latin 1 Code page 1252 _0 _1 _2 _3 _4 _5 _6 _7 _8 _9 _A _B _C _D _E „ … † ‡ ˆ ‰ Ş ‹ Œ € ‖ ƒ Ž ‘ ’ “ ” • Ŕ ŕ ˜ ™ ş › œ ž...
  • Page 75 Page18 PC852 Code page 852 _0 _1 _2 _3 _4 _5 _6 _7 _8 _9 _A _B _C _D Ç ù ä Þ à ū ć â ł æ Ő ő î Ź ° Ć ´ ĸ ĺ ó õ Ľ ľ Ř ř Ö Ú Ţ ţ Ł Á Č...
  • Page 76 Page20 Iran II Code page Iran II _0 _1 _2 _3 _4 _5 _6 _7 _8 _9 _A _B _C _D _E _F ‫ﺁ‬ ‫ﺋ‬ ‫ﺍ‬ ‫ﺎ‬ ‫ﺏ‬ ‫ﺑ‬ ‫ﭖ‬ ‫ﭘ‬ ‫ﺕ‬ ‫ﺗ‬ ‫ﺙ‬ ‫ﺛ‬ ‫ﺝ‬ ‫ﺟ‬ ‫ﭼ‬ ‫ﭼ‬ ‫ﺡ‬ ‫ﺣ‬...
  • Page 77 Page22 CP864 [Arabic] Code page 864 _0 _1 _2 _3 _4 _5 _6 _7 _8 _9 _A _B _C _D _E _F ° · ∙ √ ⍐ ⌢ ⌣ ⌬ 〈 〉 ⌨⌫ ⌥ ⌤ ⌦ ⌧ β ∞ θ ± ½ ¼ ≈ « » ‫ﻷ‬...
  • Page 78 Page24 CP737 [Greek] Code page 737 _0 _1 _2 _3 _4 _5 _6 _7 _8 _9 _A _B _C _D _E _F Α Β Γ Δ Ε Ζ Η Θ Ι Κ Λ Μ Ν Ξ Ο Π Ρ Σ Τ Υ Φ Χ Ψ Ω Ϊ Ϋ ά έ ή ί ΰ α...
  • Page 79 Page26 Thai Page27 CP720[Arabic] Code page 720 _0 _1 _2 _3 _4 _5 _6 _7 _8 _9 _A _B _C _D _E _F â å æ ã ï î ä Þ Ü © ô ¤ £ ‫ﺳ‬ ‫ﺁ‬ ‫ﺃ‬ ‫ﺅ‬ ‫ﺍ‬...
  • Page 80 Page28 CP855 Code page 855 _0 _1 _2 _3 _4 _5 _6 _7 _8 _9 _A _B _C _D _E _F ђ Ђ ѓ Ѓ ё Ё є Є ѕ Ѕ і І ї Ї ј Ј љ Љ њ Њ ћ Ћ ќ Ќ ў Ѝ џ Ў ю Ю ъ Ъ а...
  • Page 81 Page30 WCP1250[Central Eurpoe] Code page-1250 —0 —1 —2 —3 —4 —5 —6 —7 —8 —9 —A —B —C —D —E —F € „ … † ‡ ‰ Ş ‹ Ř Ţ Ž Ź ‚ ‘ ’ “ ” • Ŕ ŕ ™...
  • Page 82 Page32 WCP1254[Turkish] Code page-1254 _0 _1 _2 _3 _4 _5 _6 _7 _8 _9 _A _B _C _D _E _F € ‟ Ş ‹ Œ ‚ ƒ „ „ “ ” ˆ ‘ ’ “ ” • Ŕ ŕ ˜ ™ ş › œ Ÿ...
  • Page 83 Page34 WCP1256[ Arabic] Code page-1256 _0 _1 _2 _3 _4 _5 _6 _7 _8 _9 _A _B _C _D _E _F ‖ ƒ „ „ “ ” ˆ ‟ ‫ﭖ‬ ‫ﭺ‬ € ‹ Œ ‘ ’ “ ” • Ŕ ŕ ™...
  • Page 84 Page36 ISO-8859-2[Latin 2] Code page-8859-2 _0 _1 _2 _3 _4 _5 _6 _7 _8 _9 _A _B _C _D _E _F Ą ˘ Ł ι Ľ Ř κ λ Ş Ŝ Ţ Ź – Ž Ż ° ą ˛ ł ´ ľ ř ˇ · ş ŝ ţ ź ˝ ž ż Œ...
  • Page 85 Page38 ISO-8859-4[Baltic] Code page-8859-4 _0 _1 _2 _3 _4 _5 _6 _7 _8 _9 _A _B _C _D _E _F Ą ĸ Ŕ ¤ Ĩ Ļ κ λ Ş đ Ģ Ŕ – Ž ¯ ° ą ˛ ŕ ´ ĩ ļ ˇ ¸ ş Ē ģ ŧ Ŋ ž ŋ Ā...
  • Page 86 Page40 ISO-8859-6[Arabic] Code page-8859-6 _0 _1 _2 _3 _4 _5 _6 _7 _8 _9 _A _B _C _D _E _F ¤ Ŕ ‫ﺁ‬ ‫ﺃ‬ ‫ﺅ‬ ‫ﺍ‬ ‫ﺏ‬ ‫ﺓ‬ ‫ﺕ‬ ‫ﺙ‬ ‫ﺝ‬ ‫ﺡ‬ ‫ﺥ‬ ‫ﺱ‬ ‫ﺵ‬ ‫ﺹ‬ ‫ﺽ‬ ‫ﻉ‬ ‫ﻍ‬ ‫ﻑ‬ ‫ﻕ‬...
  • Page 87 Page42ISO-8859-8[Hebrew] Code page-8859-8 _0 _1 _2 _3 _4 _5 _6 _7 _8 _9 _A _B _C _D _E _F ¢ £ ¤ ¥ ¦ § ¨ © × « ¬ Ŕ ® ¯ ° ± ² ³ ´ ª ¶ · ¸ ¹ ÷ » ¼ ½ ¾ ι...
  • Page 88 Page44 ISO-8859-15 [Latin 3] Code page-8859-15 _0 _1 _2 _3 _4 _5 _6 _7 _8 _9 _A _B _C _D _E _F ¡ ¢ £ € ¤ Ş κ ş ¦ ª « ¬ Ŕ ® ¯ ° ± ² ³ Ž ª ¶ · ž ¹ º » Œ œ Ÿ ¿ ¬...
  • Page 89 Page46 CP856() Code page 856 _0 _1 _2 _3 _4 _5 _6 _7 _8 _9 _A _B _C _D _E _F А Б В Г Д Е Ж З И Й К Л М Н О П Р С Т У Ф Х Ц Ч Ш Щ Ъ Ы Ь Э Ю Я а...
  • Page 90 Warning: The contents of this Manual shall not be changed at will without consent. Rongta Technology (Xiamen) Group Co., Ltd reserves the right to change the product in terms of technologies, parts, software and hardware. Please contact the dealer for further information of the product.

This manual is also suitable for:

Rp326Rp327Rp328

Table of Contents