Page 1
ASSEMBLY INSTRUCTIONS for Full Bed Conversion Kit HOLLAND 4 IN 1 ACRYLIC CONVERTIBLE CRIB Model #10588 "RECOMMENDATION: We recommend the use of a Bunkie Board or box spring under a mattress for this conversion kit. 10-10588-V-01 1 of 4...
Page 2
(F) Allen key (2 pcs) (length may vary) (E) Nut 3/4" (20mm) (2 pcs) Do not fully tighten all bolts until all parts are in place. (please add an extra 1/2 revolution to the bolts when using spring washer after tightening) 10-10588-V-01 2 of 4...
Page 3
A. Rail (2 pcs) STEP 1.1 STEP 1.2 STEP 1.1: Place Headboard in vertical position and then hook rails (A) to Headboard. STEP 1.2: Place Footboard in vertical position and then hook rails (A) to Footboard 10-10588-V-01 3 of 4...
Page 4
- Insert Allen bolt 1" (25 mm) (C), through the top hole in the headboard from the inside and connect with nut 3/4" (20 mm) (E). - Tighten all bolts and nuts with Allen key (F). Assembly complete. Thanks you! 10-10588-V-01 4 of 4...
Need help?
Do you have a question about the 10588 and is the answer not in the manual?
Questions and answers