Use The Seam Guides; Turn A Square Corner - Kenmore 19501 Owner's Manual

Turn a Square Corner
The Stitching skills covered in this section require
some special skill from you.
For all other
stitches, your machine does most of the work.
Even if you are skilled at these stitches, you will
oreriny
want to learn the features of this machine that
Pres gLuide
may be new to you.
Use the Seam Guides
To turn a square corner 5/8" from the fabric edge:
1. Stop stitching and lower the needle by pressing the Up/Down Needle
Position button when the fabric edge facing you lines up with the
Needle plote
cornering guide, as shown.
Z" Raise the presser foot and turn the fabric to line the edge with the 5/8"
-- ,,"
....
seam guide.
Lower the presser foot and begin stitching in the new direction.
The seam guides on the needle plate are there to
help you measure seam width. The lines are 1/8"
apart, with the 5/8" and 7/8" lines marked.
35