Learn The Stitches; Use The Seam Guides - Kenmore 385.12612090 Owner's Manual

SECTION 3. LEARN THE STITCHES
Straight Stitches
Straight Stitch
Set the Machine
Stitch Stitch selector
,
1
Top thread tension Stitch length
control 2 to 6 control orange
Straight foot Zigzag foot
t,
2.
4.
5.
6.
Raise the presser foot,
Raise the needle to Its highest
position,
Place the edge of the fabric next
to a stitching guide line on the
needle prate (5/8" _s most
common).
Draw the threads towards the
back and lower the presser foot,
Press the foot control,
Hold the fabric loosely and gently
guide it along the guide line, so
that it feeds naturally,
Do not force the fabric or try to
pull it ttght.
% , .J
7, At the end of the seam, you may
want to reverse to lock the stitch,
8, Raise the presser foot and remove
the fabric_
9, Cut the threads.
Use the Seam Guides
Cornering Guide
The seam guides on the needle plate
are there to help you measure seam
width. The tines are 1/8" apart, with
the 5/8" and 7/8" Hines marked.
• Turn a Square Corner
g
To turn a square corner 518" from the
fabric edge:
1, Stop stitching and lower the
needle by turning hand wheel
toward you when the fabric edge
facing you lines up w_th the
cornering guide, as shown,
2. Raise the presser foot and turn
the fabric to line the edge with
the 5/8" seam guide.
3. Lower the presser foot and bffgin
stitching in the new direction,
t7