Stitch Length Button - Kenmore 19501 Owner's Manual

* Stitch Length Button
This button sets the stitch length for both straight and zigzag stitches.
When you press the stitch length button, the stitch length light will go on and
the indicator screen will show the pre-set stitch length:
([
2.0
for straight stitching
F I
"1,5" for
zigzag stitching
@--J. E F.]
NOTE:
The range of stitch length depends on the stitch pattern you select.
To Increase the Stitch Length:
Press the "+" button.
The stitch length will increase
- by 0.1 mm from "0.0" up to "1.0".
-
by 0 .5
m m from
"1.0 " up
to
"4.5 ".
tiir
'"
To
Adlust
the Stitch Length
Quickly:
I
Hold Down the "+" or "-" button until you reach the length you desire.
To Return to the Preset Stitch Length:
(or clear the stitch length setting)
To Decrease the Stitch Length:
Press the Stitch Length button again (or press the Clear button). The stitch
length light and the indicator screen will go off.
Press the
"-"
button,
The stitch length will decrease
- by 0.1 mm from "1.0" down to "0.0".
- by 0.5 mm from '4.5" down to "1.0".
33