.r........
Bo
n
Connued)
Bobbin
winder
5
5
70stopper
EEWED
NOTE:
The Pattern Indicator will read "SP"
to show the machine is
9.
Push the bobbin winder spindle to the left and clip the thread.
winding the bobbin.
10. Remove the bobbin.
7.
Press the foot control gently to start the machine.
11. Push in the clutch to put power back into the needle.
NOTE:
After the bobbin is slightly filled, stop and clip the thread coming
NOTE:
If you do not push in the clutch, the machine will not run when
from the top of the bobbin.
you press the foot control.
8.
Slowly start the machine again and wind the thread until the bobbin
stops.
20