Program Decorative Stitch Patterns 45 4 7 Etc; One Cycle Stitching; Two Cycle Stitching - Kenmore 19501 Owner's Manual

To program stitch pattern combinations, press the pattern selection buttons
e Two Cycle Stitching
in the order shown,
To sew two of any stitch pattern, press the memory button twice after
selecting the stitch pattern numbers,
Set the Machine
NOTE:
Continue to press the foot control until the machine stops
Thread tension
automatically.
1 to 4
Combine Stitch Patterns
_
1.
Press the Auto-Lock.
F: Satin stitch foot
L
F]
2. Press Memory.
46 3. Press the stitch pattern.
* One Cycle Stitching L
4.
Press Memory.
1
. Press the Auto-Lock.
4
i
145L
5. Press the next stitch pattern.
M] 2. Press Memory.
M M J 6. Press Memory.
45
3.
Press the stitch pattern. 17 s tt 4 7,
Press the stitch pattern.
4,4
LMJ 4. Press Memory.
4,
L
1J
8. Press Memory.
l 5. Press the Auto-Lock.
4L5 9. Press the stitch pattern.
m
4,
LM]
6.
Press Memory.
M
1
L
L
10.
Press Memory.
4
See the Pattern Single Unit Chart.
__
You will sew one flower.
11.
Press the Auto-Lock.
NOTE:
The Auto-Lock stitch is already programmed into the buttonhole
12.
Press Memory.
stitches and monograms, but not on any other stitches. You must
To repeat the same combination of stitches, just press the foot control again
press Auto-Lock to lock the decorative or any other stitches, after stitching the first combination.
82