O Stitch Length Button - Kenmore 19502 Owner's Manual

o Stitch Length Button
This button sets the stitch length for both straight and zigzag stitches.
When you press the stitch length button, the stitch length light wilt go on and
the indicator screen wilt show the pre-set stitch length:
"'2.0" for straight stitching
"1.5" for zigzag stitching
NOTE: The range of stitch length depends on the stitch pattern you select.
Ci3
To Decrease the Stitch Length:
Press the "-" button,
The stitch length will decrease
-- by 0.1 mm from "l.0" down to "0.0'"
-- by 0.5 mm from "4.5" down to "1.0",
............... J
To increase the Stitch Length:
Press the "+" buttom
The stitch length will increase
-- by 0.1 mm from "0.0" up to "1,0'"
-- by 0.5 mm from "1.0'" up to "4_5",
To Adjust the Stitch Length Quickly:
Hold Down the "'+'" or ,,i,, button unti_ you reach the length you desire.
To Return to the Prese_ Stitch Length:
(or clear the stitch _ength setting)
Press the Stitch Length button again (or press the Clear button), The stitch
length light and the indicator screen will go off.
33