b)
back cover
c)
stand
3. Follow the procedure in
Intrusion switch
Removing the intrusion switch
1. Follow the procedure in
2. Remove the:
a)
stand
b)
back cover
c)
cable cover
d)
speaker cover
e)
system board shield
f)
power supply unit
g)
VESA mount bracket
3. To remove the intrusion switch:
a) Disconnect the intrusion switch cable from the connector on the system board [1].
b) Unthread the intrusion switch cable from the retention clips on the computer [2].
c) Remove the screw that secures the intrusion switch to the computer [3].
d) Slide and lift the intrusion switch away from the computer [4].
50
Disassembly and reassembly
After working inside your
computer.
Before working inside your
computer.