Installing the power and OSD buttons board
1. Connect the cable to the power and OSD buttons board.
2. Affix the tape on the OSD buttons board.
3. Insert the power and OSD buttons board into the slot.
4. Align the metal plate on the power and OSD buttons board.
5. Tighten the screw to secure the power and OSD buttons board.
6. Install the:
a)
optical drive
b)
back cover
c)
stand
7. Follow the procedure in
Coin cell battery
Removing the coin cell battery
1. Follow the procedure in
2. Remove the:
a)
stand
b)
back cover
c)
system board shield
3. Press the latch to release the coin cell battery and remove it from the computer.
After working inside your
computer.
Before working inside your
computer.
Disassembly and reassembly
55