Installing the cable cover
1. Align the notches on the cable cover to the holes on the computer and press the cable cover until it snaps in.
2. Tighten the screw to secure the cable cover to the computer.
3. Install the stand.
4. Follow the procedure in
Back cover
Removing the back cover
1. Follow the procedure in
2. Remove the:
a)
stand
b)
cable cover
3. Pry the edges of the back cover from the bottom to release it from the computer.
After working inside your
computer.
Before working inside your
computer.
Disassembly and reassembly
13