Installing The Stand; Cable Cover; Removing The Cable Cover - Dell OptiPlex 7440 All-In-One W11C Owner's Manual

Installing the stand

1. Place the computer on a clean, flat surface and align the stand, and then slide it on the back of the computer.
2. Press the stand down till it snaps in.
3. Follow the procedure in

Cable cover

Removing the cable cover

1. Follow the procedure in
2. Remove the stand.
3. To remove the cable cover:
a) Remove the screw that secures the cable cover to the computer [1].
b) Push the release tabs to release the cable cover [2].
c) Lift the cable cover away from the computer [3].
After working inside your computer.
Before working inside your computer.
Disassembly and reassembly 11