Installing the WLAN card
1. Align the WLAN card to the connector on the system board.
2. Tighten the screw to secure the WLAN card to the system board.
3. Connect the antenna cables to the connectors on the WLAN card.
4. Install the:
a)
system board shield
b)
back cover
c)
stand
5. Follow the procedure in
Speaker module
Removing the speaker module
1. Follow the procedure in
2. Remove the:
a)
stand
b)
back cover
c)
cable cover
d)
speaker cover
e)
system board shield
3. To release the speaker module:
a) Disconnect the speaker cable from the connector on the system board [1].
b) Unthread the speaker cables from the retention clips [2].
After working inside your
computer.
Before working inside your
computer.
Disassembly and reassembly
31