pitsco Mr. Robot Instructions Manual page 7

Joystick Light
Blinking Joystick light means
the Joystick has not found a
Receiver.
If this happens, ensure that:
• Receiver is connected to
PSP-Nx-v3.
• PSP-Nx-v3 is connected to
NXT, and
• NXT is powered on.
Connectivity between
Joystick and Receiver
Red oval light button on
Receiver.
A blinking button means
the receiver is not properly
connected to your Joystick.
Power off and on your Joystick
and press this button to reset
connection between the
Joystick and receiver.
Set the Joystick in Analog
mode.
Press the Analog button on
your Joystick once to set it in
Analog mode.
PSP-Nx-v4 Connectivity Guide
EV3 Addendum to Mr. Robot
III