Ev3 Addendum To Mr. Robot - pitsco Mr. Robot Instructions Manual

Addendum to Mr. Robot
Addendum to Mr. Robot build instructions on how to attach the new LEGO EV3 programmable brick to Mr. Robot.
• The LEGO® NXT Brick has been replaced by the EV3 Brick. Mr. Robot now ships with EV3 and a newer-style wireless controller and
sensor module. The controller is a wireless Sony PlayStation® 2 gamepad and can connect to EV3 through a specialized sensor
included in your kit.
• Your EV3 is preprogrammed to work out of the box. No additional programming is necessary. Simply connect the wireless controller
sensor module to Port 2. The wireless controller and receiver will need to be paired. Follow the instructions in this addendum to pair
your controller and receiver.
• The attachment of the EV3 Brick is very simple and is shown in this addendum. Steps in the original instructions starting with Middle
Frame Step 2 to Middle Frame Step 4 show how to build the framework for the attachment of the NXT Brick; however, those can be
ignored. Instead, please refer to the views in this addendum to attach the EV3.
• NXT touch sensors shown in the instructions are no longer compatible with the EV3 system. Any steps shown in the build
instructions relating to mounting of sensors can be skipped.
• The program to operate Mr. Robot is preinstalled on the EV3 Brick. Find and run the program Mr. Robot to begin using.

EV3 Addendum to Mr. Robot

I