Siemens SINUMERIK ONE NCU 1760 Equipment Manual page 4

Preface
Target group
This documentation is intended for manufacturers of machine tools, particularly:
● Project engineers, electricians and installers
● Maintenance and service personnel
Benefits
The information in this manual facilitates the installation and connection of the SINUMERIK
ONE numerical control in the control cabinet.
Standard scope
This documentation only describes the functionality of the standard version. Extensions or
changes made by the machine tool manufacturer are documented by the machine tool
manufacturer.
Other functions not described in this documentation might be executable in the control. This
does not, however, represent an obligation to supply such functions with a new delivery or when
servicing.
Further, for the sake of simplicity, this documentation does not contain all detailed information
about all types of the product and cannot cover every conceivable case of installation, operation
or maintenance.
Note regarding the General Data Protection Regulation
Siemens observes standard data protection principles, in particular the principle of privacy by
design. That means that
this product does not process / store any personal data, only technical functional data (e.g. time
stamps). If a user links this data with other data (e.g. a shift schedule) or stores personal data
on the same storage medium (e.g. hard drive) and thus establishes a link to a person or
persons, then the user is responsible for ensuring compliance with the relevant data protection
regulations.
Technical Support
Country-specific telephone numbers for technical support are provided on the Internet at the
following address (https://support.industry.siemens.com/sc/ww/en/sc/2090) in the "Contact"
area.
If you have any technical questions, use the online form in the "Support Request" area.
EC Declaration of Conformity
The EC Declaration of Conformity for the EMC Directive can be found on the Internet at the
following address
support.industry.siemens.com/cs/ww/de/ps/14604/certww/en/ps/13231/cert).
4
(https://support.industry.siemens.com/cs/https://
Equipment Manual, 02/2020, A5E45627861B AB
NCU 1760