Siemens SINUMERIK ONE NCU 1760 Equipment Manual page 116

Connectable components
11.2 PP 72/48D PN
Pin
39
41
43
45
47
49
VI: Voltage input / VO: Voltage output
I: Signal input / O: Signal output / GND: Reference potential (ground)
Digital inputs
Characteristics
● X222: Inputs 3.0 to 3.7 are connected as rapid inputs; this means the input filter has a max.
delay time of 600 μs.
● The inputs have no signaling (status LEDs).
● The inputs are not isolated.
● It is not possible to connect 2-wire BEROs.
Terminal assignment for the digital inputs
The following figure shows an example of the terminal assignment for the digital inputs on
connector X111. Connectors X222 and X333 are assigned analogously.
①
②
116
Signal name
Output 5.0
Output 5.2
Output 5.4
Output 5.6
DOCOM3
DOCOM3
when using the internal power supply P24OUT
when using an external power supply P24OUT
Type Pin Signal name
O 40 Output 5.1
O 42 Output 5.3
O 44 Output 5.5
O 46 Output 5.7
VI 48 DOCOM3
VI 50 DOCOM3
ext
Equipment Manual, 02/2020, A5E45627861B AB
Type
O
O
O
O
VI
VI
NCU 1760