NAMCO TEKKEN TAG TOURNAMENT Operation Manual page 46

Pc board kit
Hide thumbs Also See for TEKKEN TAG TOURNAMENT:
Table of Contents

Advertisement

3
Press the Pl button switch 1 to execute the selected item.
Note: The above figure shows the pair control panel. In case of the single control panel
(that is, two cabinets corresponding to the JAMMA VIDEO standard (JVS)
linked for networked head-to-head-play), the control panel of the cabinet on which
the PC board is installed shall be called as Pl.
4
Do either one of the following procedure to return to the test menu screen.
Press the PI start switch.
l
Hit the Pl S-direction joystick up or down to select "CANCEL" on the screen and then press
l
the Pl button switch 1.
Note: The above figure shows the pair control panel. In case of the single control panel
(that is, two cabinets corresponding to the JAMMA
linked for networked head-to-head play), the control panel of the cabinet on which
the PC board is installed shall be called as PI.
5
Perform "6-1-3 Finishing the Test Mode" (p.28) to exit the test mode.
PI B-direction joystick
are
VIDEO standard (JVS)
are

Advertisement

Table of Contents
loading

Table of Contents