NAMCO TEKKEN TAG TOURNAMENT Operation Manual page 35

2 Hit the PI S-direction joystick to up or down to select the adjusting item out or
"Contrast", "Bright R", "Bright G", and "Bright B".
Note: The above figure shows the pair control panel. In
case of the single control panel (that is, two cabinets
corresponding to the JAMMA
the control panel of the cabinet on which the PC
board is installed shall be called as Pi.
3 Hit the Pl S-direction joystick to right or left to change the setting.
shall he checked on the color bar on the screen.
Item
Contrast
B r i g h t R Adjusting shade and tone of red color of the picture signal
Bright G Adjusting shade and tone of green color of the picture signal
Bright B Adjusting sbade and tone of blue color of the picture signal
* After changing the setting,
Press the Pl button switch 5. The changed settings are erased. .
To stop adjusting,
l
press the PI button switch 4. The 'Color Edit" screen disappears and adjustment is
suspended.
To re-adjust,
l
press the Pl button switch 4 again. The "Color Edit" screen appears again for re-adjustment
4 Press the Pl start switch to return to the test menu screen after completing the whole
"DISPLAY TEST'.
Press the PI button switch 1 to display the adjusting screen for the other adjustment in the
"DISPLAY TEST'.
5 Perform "6-l-3 Finishing the Test Mode" (p.28) to exit the test mode.
VIDEO standard
are linked for networked head-tohead play),
Description I
I