NAMCO TEKKEN TAG TOURNAMENT Operation Manual page 38

2 Make adjustment according to the description on the table below with the appropriate joystick
and the switch.
Changing tbe sound number
Play the sound
Switch monaural/stereo
Stereo sound test
Press the Pl
Note: Tbe above figure shows the pair control panel. In case of the single control panel
(that is, two cabinets corresponding to tbe JAMMA
linked for networked head-to-head play), the control panel of the cabinet on which
the PC board is installed shall be called as Pl.
4 Perform "6-l-3 Finishing the Test Mode" (p.28) to exit the test mode.
corresponding to the JAMMA
VIDEO SYNC setting for the cabinet corresponding to the JAMMA VIDEO standard (JVS) shall be
made.
option is not available even if it is displayed.
1 Perform the procedure 1 - 4 of "6-I-2 Selecting the Adjusting Items" (p.26-27). Select "JVS
CABINET OPTIONS" in 3.
The following screen is displayed.
Test/Adjustment
The sound to be used in the
game is selected.
The sound of tbe selected
number is played.
Monaural sound/stereo sound is
switched.
Stereo sound output is tested.
TROUBLESHOOTING" on p.48.
start switch
to return to the test menu screen.
PI buyzn sjuitches
How to operate
Hit the Pl S-direction joystick to right or left to
change the number.
button
Press the PI
Press the Pl button switch 2 to switch.
Select the sound number [OOI],
switch 1. The sound is played from the left
speaker, right speaker, and finally both speakers as
stereophonic.
Pl start switch
8
VIDEO standard (JVS)
VIDEO standard (JVS)) m
switch I to play the sound.
press the Pl button
are