B/M Mode Scanning Hints - GE LOGIQ e Quick Manual

LOGIQ e Quick Guide
B/M Mode Image Optimize (continued)

B/M Mode Scanning Hints

Auto Optimize. Improves imaging performance
while reducing optimization time.
Frequency. Changes system parameters to best
optimize for a particular patient type.
B-Mode Primary Controls
Direction 5130174-100 Rev. 2
Maps. There is an inter-dependency between gray
maps, gain, and dynamic range. If you change a
map, revisit gain and dynamic range settings.
Dynamic Range. Affects the amount of gray scale
information displayed. If you increase the gain, you
may want to decrease the dynamic range.
B/M Mode
Image Optimize
Edge Enhance. Better delineates the amount of
border crispness.
Frame Average. Smooths the image by averaging
frames. Affects the amount of speckle reduction.
B-Mode Secondary Controls
14