Table of Contents
Advertisement
Distributed by MicroDAQ.com, Ltd.
E-1608 User's Guide
Power
Parameter
External power supply
Supply current
User output voltage range
User output current
Note 6:
This is the total quiescent current requirement for the device that includes the LEDs. This does not
include any potential loading of the digital I/O bits, +VO terminal, or the AOUTx outputs.
Network
Ethernet connection
Parameter
Ethernet type
Communication rates
Connector
Cable length
Additional parameters
Network interface
Parameter
Protocols used
Network ports used
Network IP configuration
Network name
Network name publication
www.MicroDAQ.com
Table 15. Power specifications
Condition
Quiescent current
Available at +VO terminal
Available at +VO terminal
Table 16. Ethernet connection specifications
Specification
100 Base-TX
10 Base-T
10/100 Mbps, auto-negotiated
RJ-45, 8 position
100 meters max
HP Auto-MDIX support
Table 17. Factory default specifications
Specification
TCP/IP (IPv4 only), UDP
UDP:54211 (discovery)
UDP:6234 (bootloader only)
TCP:54211 (commands)
TCP:54212 (scan data)
DHCP + link-local, DHCP, static, link-local
E-1608-xxxxxx, where xxxxxx are the lower 6 digits of the device MAC address
By NBNS (responds to b-node broadcasts, therefore only available on the local
subnet)
25
(603) 746-5524
Specification
5V, 1A
330 mA typical (Note 6)
710 mA max including all external loading
4.40 V min to 5.25 V max, assumes supplied
AC adapter is used
10 mA max
Specifications
Advertisement
Table of Contents
Need help?
Do you have a question about the E-1608 and is the answer not in the manual?
Questions and answers