Table of Contents
Advertisement
www.glp.de
4. Features
The Fusion Par FP7 from GLP® is a compact but powerful LED-based strobe/color
mixing effect lighting fixture.
The fixture features an array of 7 x 30 watt RGBW LEDs that produce a powerful beam
with a 6° beam angle.
You can either vary color continuously using RGBW color mixing or select preset colors
on the fixture's virtual color wheel.
A shutter channel gives variable pulse and strobe effects running at up to 20 Hz, and a
master dimmer channel gives 0-100% continuous dimming. The fixture offers a choice
of four dimming curves and two dimming modes that are optimized for dimming
speed or slow dimming smoothness.
A separate CTO channel is available in DMX Mode 1, letting you quickly adjust the
color temperature of the white light output.
Fixtures can be connected to power and data in daisy-chains, reducing the number of
cable runs required in installations with multiple fixtures.
Besides indoor use in permanent and temporary installations, the FP7's IP65 rating and
rugged construction mean that it can also be used outdoors in temporary installations
if precautions are taken to prevent immersion in water and damage from direct
sunlight.
Using the Floorstand / Mounting bracket that is supplied with the fixture, the FP7 can be
placed upright on a level surface, fastened to a secure surface in any orientation or
suspended from a suitable structure such as a rigging truss by means of an omega
clamp and rigging clamp (optional accessories).
A spring-loaded latch on the front of the fixture allows quick and easy mounting of
optical accessories.
The FP7 is not suitable for household use, for use in any location where unattended
children have access to it, or for use in permanent outdoor installations.
Virtual color wheel
The FP7's virtual color wheel effect gives you quick access to a range of 33 LEE-
referenced color presets. You can select a static color or run a dynamic sequence of
regular or random colors.
The virtual color wheel takes priority over RGBW control in DMX Mode 1. If you want to
use RGBW color mixing, set the virtual color wheel channel to zero.
Color temperature presets from a warm tungsten emulation to a very cool 8000 K white
are available on the color wheel DMX channel.
RGBW color mixing
RGBW color mixing gives you complete control of color. In DMX Mode 1, which has
both RGBW color mixing and a virtual color wheel effect, you must set the virtual color
wheel channel to zero before the RGBW channels become active.
RGB color mixing is available in DMX mode 5 which has a DMX footprint of only three
channels.
12
Fusion Par FP7 User Manual Rev. A
Advertisement
Table of Contents
