Operating the appliance
en
1
Operating the
appliance
P reparing the washer dryer
O p e r a t i n g t h e a p p l i a n c e
The washer dryer was tested before
delivery. To remove residual water from
the test procedure, the first wash cycle
should be run without laundry using the
W Fluff Clean programme.
Before washing/drying for the first time
Note:
Never switch on a damaged washer
■
dryer!
Inform your customer
■
service!~ Page 45
Insert mains plug.
1.
Turn the tap on.
2.
Due to the use of the water
condensation technology for drying,
please keep the connected water
tap open during the drying process,
otherwise proper drying cannot be
guaranteed.
Open the door.
3.
26
Selecting the programme/
Switching on the appliance
Note:
If you have activated the childproof lock,
you must deactivate it before you can
set a programme.
Select the required programme with
■
the programme selector. Can be
rotated in either direction.
The washer dryer is switched on.
The following figures are indicated
continuously on the display panel for
the selected programme:
the programme duration,
■
the preset temperature,
■
the maximum load (if the door is
■
open),
...
■
Adjusting the washing
programme
You can use the displayed default
settings or adjust the selected
programme optimally to the laundry
items by changing the default settings
or selecting additional functions. The
selectable settings and additional
functions depend on the selected
washing/drying programme.
Overview of programmes~ Page 32
Notes
Options can be selected, deselected
■
or changed depending on the
progress of the programme.