Table of Contents
Advertisement
Changing programme default settings
en
After the required soaking time,
4.
reselect Start/Reload A if the
programme is to be continued or
change the programme.
Load laundry of the same colour.
Note:
No additional detergent is required,
the soaking solution is used for
washing.
0
Changing programme
default settings
Y ou can change the default settings for
C h a n g i n g p r o g r a m m e d e f a u l t s e t t i n g s
selected programmes. The settings can
be changed even while the selected
programme is running. The effects
depend on the progress of the
programme.
°C Temp.
(: The indicated washing
temperature can be changed. The
maximum selectable washing
temperature varies depending on the
selected programme.
Overview of programmes ~ Page 32
0 rpm
0: The spin speed can be changed
before and during the programme (in
rpm, revolutions per minute) depending
on the progress of the programme.
Setting - - - - (Rinse stop = without final
drain/spin cycle), laundry remains in the
water after the last rinse cycle.
Setting 0 (Without any spin cycle), drain
the rinsing water only, no spin cycle.
The maximum spin speed depends on
the programme and model.
Overview of programmes~ Page 32
36
B Finish in
8:Define the Finish in time (end
of programme).
The respective programme
Note:
duration is displayed by selecting
the programme. The programme
duration is automatically adjusted while
the programme is running if the
programme duration needs to be
changed, e.g. due to changes in the
programme default settings.
Before the programme starts, the end of
the programme can be preselected in
hourly increments up to a maximum of
24h.
When the programme has started,
the preselected time is displayed e.g.
8h and counts down until
the programme starts. Then the
programme duration is displayed,
e.g. 2:30.
When the programme has started,
the preselected time can be changed
as follows:
Touch the Start/Reload A button.
1.
Touch the B Finish inbutton
2.
and change the Finish in time.
Touch the Start/Reload A button.
3.
Ô Drying
@: The drying function can be
activated, deactivated and set with this
button. Washing and drying without
interruption is possible in automatic
mode only. If the programme for
individual drying is selected, automatic
drying or timed drying with a required
drying duration is available.
Advertisement
Table of Contents
