Enable/Disable RSS-Expand
.
Enable RSS-Expand
Code ID
Read "Enable CodeID"to start the setting, then scan the corresponding 16 HEX
Value of CodeID character and save.
Set the CodeID of RSS-Expand as"p" (16 HEX Value is 0x70) :
1. Read above "Enable CodeID"
2. Read number "7" , "0" (See Appendix- Data Code)
3. Read "Save"
Appendix
Default Setting Table
Parameters
Setting Function
Working Mode
Reading Time
Reading Interval
Sensitivity Class
Return RSS-Expand to Default
RSS-Expand - Enable CODEID
Default Setting
General Setting
ON
Manual
15s
1s
High Sensitivity
Disable RSS-Expand
On OFF,setting code will be transmitted.
Parameter from:0-255s,0 is no limit
time,step: 1 sec
Parameter from:0-22.5s,step: 0.1 sec
Auto-Senor Mode Valid
66
Remarks