Charging The Battery; Operation - Vax ONE PWR CORDLESS BLADE 4 Series User Manual

GETTING STARTED

CHARGING THE BATTERY

THIS MACHINE IS ONLY TO BE USED WITH VAX ONEPWR BATTERIES AND CHARGER.
PLEASE READ THE SAFETY GUIDE BEFORE USE.
NOTE: Before first use, ensure the battery is fully charged. Failure to fully charge the battery
before first use may result in poor battery performance. The life expectancy of the battery will vary
depending on the usage of the machine.
Slide the battery down on to the charger.

OPERATION

WARNING: The brushbar in the powered head constantly rotates when switched on. Never use the
powered head on one spot for an extended period of time as the brushbar may damage the floor
surface. Always turn the powered head brushbar off when cleaning hard floors. To prevent any
damage being sustained, test on an inconspicuous area of the flooring first.
Slide the battery into the handheld until
it clicks into place.
The charger light will flash white to
show when the battery is charging.
The light on the charger will stop
flashing and go off when the battery
is fully charged.
Place your foot on the powered head.
support.vax.co.uk
Once fully charged, slide the battery off
the charger to remove.
To check the battery charge
level press the battery symbol.
Pull the handle backwards to recline.
7