Related Manuals for Vax RAPID POWER Series
Summary of Contents for Vax RAPID POWER Series
- Page 1 SERIES CARPETS DRY IN AS LITTLE AS 1 HOUR* LET’S GET STARTED. ECGLV1B1 CWGRV011 CWGRV021 CDCW-RPXR *Tested in quick clean mode. Results may vary.
-
Page 2: Let's Talk Safety
• Before using the carpet washer test your carpets/rugs/upholstery for colourfastness and pile distortion. • Only VAX recommended solution should be used with this carpet washer. Using other solutions may invalidate the guarantee. Don'ts •... - Page 3 • Don’t attempt to remove blockages with sharp objects as this may cause damage to your carpet washer. • Don’t use the carpet washer with incorrect voltage as this may result in damage or injury to the user. The correct voltage is listed on the ratings label. Do's •...
- Page 4 Maintaining your carpets will ensure they keep their appearance for longer and smell fresh and clean. You’ve chosen carpets for your home for a reason and VAX will help you take good care of them.
- Page 5 Standard tools included Contents with your machine Let's talk safety 2 - 3 Getting to know your machine 2.5m 250ml Accessory Hose Platinum Solution Getting started Rapid Power All standard tools, plus Using your machine 8 - 11 Taking care of your machine 12 - 13 2 in 1 Antimicrobial Tool Rapid Power Refresh...
-
Page 6: Getting To Know Your Machine
Wattage 1200W Wattage 1200W Wattage 1200W Cord length 8m Cord length 8m Cord length 8m Cord length 8m Weight 8.4kg Weight 8.4kg Weight 11.05kg Weight 8.4kg Subject to technical change without notice. To purchase consumables and accessories, please visit vax.co.uk... -
Page 7: Getting Started
When using the carpet washer, basic safety precautions should always be observed and don’t over saturate your carpets. Only use VAX carpet solution. Using other solutions may cause excess foaming and will invalidate your guarantee. The clean water tank should only be filled with warm water (max 40°C). Filling the clean water tank with hot/boiling water will damage your machine and invalidate the guarantee. -
Page 8: Using Your Machine
Quick Clean Mode: Best for a quick, surface clean because carpets dry in as little as 1 hour. Deep Clean Mode: Best overall results for a thorough, deep clean. Press the clean water/ Twist the solution tank Pour VAX carpet cleaning Twist the water tank cap solution tank release cap anti-clockwise to solution into the tank. - Page 9 Using your machine Squeeze the trigger to For best results apply Plug into the mains, Press the recline pedal release solution and water/solution on the press the on/off pedal and pull the handle water mix. forward stroke and to switch on. backwards.
- Page 10 SpinScrub brushes and brushbar. Do not place the washer at top of stairs to avoid it falling down stairs. Place washer at bottom of stairs and work up. Using the hose and wash tool Turn wash/rinse dial Pour VAX carpet cleaning Fill the clean water Open the hose connector solution into the solution tank with warm water to wash.
- Page 11 Using your machine Press the trigger on the Squeeze the trigger To remove the tool, lift and hose to release solution on the forward stroke, push the tool clip over the /water. release the trigger on the tab at the end of the hose backward stroke to pick and pull to remove.
-
Page 12: Taking Care Of Your Machine
Taking care of your machine CAUTION: Always unplug the carpet washer before performing any maintenance/troubleshooting checks. Emptying and cleaning the dirty water tank IMPORTANT: Always empty and rinse out clean and dirty water tanks and leave to air dry before replacing. Do not leave solution stored in the tanks between uses. - Page 13 Taking care of your machine To re-fit, slide the dirty Hook the tank release Lift and hook the latch water tank onto the carpet catch over the front of the on the tank onto the lid washer, making sure tank and push downwards and push down to lock the tabs on the tank line to lock the catch in place.
-
Page 14: Let's Talk Technical
Let’s talk technical CAUTION: Always unplug the carpet washer before performing any maintenance/troubleshooting checks. Cleaning the SpinScrub brushes Remove the tanks and lie Firmly pull the sides of Depress the clips to The SpinScrub brushes the washer on its back the SpinScrub brushes release the SpinScrub can be removed and... - Page 15 Let’s talk technical Cleaning the SpinScrub filter Remove both tanks and Lift the nozzle release clip Hold the front of the Wipe any dirt and debris tilt the carpet washer to unlock the nozzle. nozzle and push down to from the mesh filter. so it is lying on its back.
-
Page 16: What To Do If It Goes Wrong
What to do if it goes wrong CAUTION: To reduce the risk of personal injury, unplug the carpet washer before performing maintenance/ troubleshooting checks. Problem Solution • Check the contents panel on the box to make sure the part is definitely included with this carpet washer. -
Page 17: Getting In Touch
Getting in touch † Registration required. Terms and conditions apply, see vax.co.uk for details. - Page 18 Accessories Don’t forget your accessories! Order at: www.vax.co.uk/spares-and-solutions Platinum (1.5l) 1-9-139136 Platinum (4l) 1-9-142060 Platinum Carpet Cleaning Solution deep cleans carpets and removes stubborn stains. Safe to use on wool carpets - Woolsafe approved.
- Page 19 Notes...
- Page 20 Check with your Local Authority or retailer for recycling advice. © 2019 VAX Limited. All rights reserved. The VAX trade mark and VAX lozenge is the property of Techtronic Floor Care Technology Ltd and is registered in the EU and may be pending or registered in other countries.