Vax W85-PL-T Dual Power Pro Advance Getting Started

Vax W85-PL-T Dual Power Pro Advance Getting Started

Hide thumbs Also See for W85-PL-T Dual Power Pro Advance:

Advertisement

Dual Power
Pro Advance
Let's get started
vax.co.uk
W85-PL-T

Advertisement

Table of Contents
loading

Summary of Contents for Vax W85-PL-T Dual Power Pro Advance

  • Page 1 Dual Power Pro Advance Let’s get started vax.co.uk W85-PL-T...
  • Page 2: Let's Talk Safety

    Let’s talk safety This carpet washer is intended for household use only and NOT for commercial or industrial use. • Only use the carpet washer indoors and keep the area you’re cleaning well lit. Basic • Keep fingers, hair and loose clothing away from moving parts safety and openings whilst using the carpet washer.
  • Page 3 • Before using the carpet washer test your carpets/rugs/upholstery for colourfastness and pile distortion. • Only Vax recommended tools and solution should be used with this carpet washer. Using other solutions may invalidate the guarantee. • Don’t pull or carry this carpet washer by the power cord.
  • Page 4 Maintaining your carpets will ensure they keep their appearance for longer and smell fresh and clean. You’ve chosen carpets for your home for a reason and Vax will help you take good care of them.
  • Page 5: Table Of Contents

    Contents Dual Power Pro Advance Included with your machine Let’s talk safety Getting to know your machine Hose Getting started Using your machine Accessory bag Taking care of your machine Let’s talk technical SpinScrub tool What to do if it goes wrong Getting in touch Pre-treatment wand Accessories...
  • Page 6: Getting To Know Your Machine

    Part number 1-1-134979-00 SpinScrub tool Hose 1-9-133245-00 1-2-135810-00 Voltage Please refer to product rating label Wattage Please refer to product rating label Cord length 9m Weight 9.5kg vax.co.uk Subject to technical change without notice. To purchase consumables and accessories, please visit...
  • Page 7: Getting Started

    Only use Vax carpet solution. Using other solutions may cause excess foaming and will invalidate your guarantee. The clean water tank should only be filled with warm water (max 40’C). Filling the clean water tank with hot/boiling water will damage your machine and invalidate the guarantee.
  • Page 8: Using Your Machine

    Using your machine CAUTION: Always unplug the carpet washer before performing any maintenance/troubleshooting checks. IMPORTANT: Your dirty water tank is fitted with a float. When the dirty water tank is full, or the floorhead is not in contact with the carpet the float will shut off the suction on the carpet washer. You will be able to hear if this has happened as the motor noise on the machine will increase.
  • Page 9 Using your machine NOTE: Carpets should be dry vacuumed thoroughly before washing. For heavily soiled areas, it may be necessary to repeat the cleaning process. Make crisscrossing strokes to the original pattern and overlap each pass. Pour required amount Fill the clean water/ Plug into mains, Turn wash/rinse dial to of carpet cleaning...
  • Page 10 Using your machine NOTE: The carpet washer should be in the upright position when using the hose or pre-treatment wand; de-activating the SpinScrub brushes and brushbar. Using the pre-treatment wand Pre-treating your carpet before washing will help to remove stubborn stains. Do not saturate your carpet. Fill the clean water tank Turn wash/rinse Pull down accessory...
  • Page 11 Using your machine NOTE: The carpet washer should be in the upright position when using the upholstery tool; de-activating the SpinScrub brushes and brushbar. Using the upholstery wash tool Pull down accessory Pour required amount Fill the clean water tank Turn wash/rinse hose connector cover.
  • Page 12 Using your machine CAUTION: Test for colourfastness - Wet a white absorbent cloth with the solution. In a small hidden area of your carpet/ rugs/upholstery gently rub with the dampened cloth. Wait ten minutes and check for colour removal or bleed with a white paper towel or cloth.
  • Page 13: Emptying The Dirty Water Tank

    Using your machine CAUTION: Always unplug the carpet washer before performing any maintenance/troubleshooting checks. Emptying the dirty water tank Press dirty water tank Empty dirty water over Pull and lift dirty water release latch, pull to the sink. Rinse dirty water tank clip to release lid.
  • Page 14: Taking Care Of Your Machine

    Taking care of your machine Removing and cleaning the nozzle Remove both tanks and Lift nozzle release clip Rinse nozzle under water Replace nozzle by lining tilt carpet washer back. and pull nozzle forward, to remove dirt/debris. up tabs on nozzle with separating tabs on nozzle tabs underneath front of and carpet washer.
  • Page 15: Let's Talk Technical

    Let’s talk technical CAUTION: Always unplug the carpet washer before performing any maintenance/troubleshooting checks. Changing the brushbar Lie carpet washer on its Using a crosshead screwdriver remove the top and bottom screws from back exposing SpinScrub each of the rug guards (metal pins) and remove to get access to the brushbar. brushes and brushbar.
  • Page 16 Let’s talk technical Changing the brushbar (continued) Undo the four screws on the side brushes. Pull and slide left side brushes and remove side cap from brushbar. Pull and slide right side brushes together with brushbar. Loop replacement brushbar through belt Remove side cap from brushbar and unloop brushbar and onto belt grip.
  • Page 17 Accessories Don’t forget your accessories! Order at: www.vax.co.uk/spares-and-solutions Ultra+ carpet cleaning solution (1.5l) 1-9-132706-00 Ultra+ Carpet Cleaning Solution tackles stubborn spots and stains and removes unpleasant odours too. It’s specially formulated to leave no sticky residue, so your carpets stay fresher for longer.
  • Page 18: What To Do If It Goes Wrong

    What to do if it goes wrong Problem Solution • Check the ‘This pack contains’ panel on the box to make sure the part is definitely included in your unit. Is there an accessory missing? • The plug may not be fully pushed into the electrical socket. •...
  • Page 19: Getting In Touch

    Getting in touch * Calls are charged at the UK local rate. Please make a note of the serial number and model number of the product before calling. Registration required. Terms and conditions apply. †...
  • Page 20 Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. © 2014 All rights reserved. VAX®, VAX Lozenge are trade marks or registered trade marks of Techtronic Floor Care Technology Ltd.

Table of Contents