Nuna Exec User Manual page 16

Harness Buckle Adjustment
The harness buckle has two positions. Use the
position that is closest to (but not under) your child.
Remove infant insert (p.24) and loosen and
unbuckle harness (p.22).
1
- Unsnap seat cover (1) and pull forward while
pulling harness buckle backwards through slot
in seat cover (2).
2
- Route harness buckle strap through either slot (1
or 2) on the rear facing True Tension
buckle through corresponding slot in seat cover
and replace seat cover and inserts (if using).
Cup Holder Use
3
- Pivot cup holder up and lock in use position.
4
- Push center of cup holder down to extend to
opened position.
5
- While in the opened position, pull up on the
cup holder to remove for washing.
6
- To store, collapse cup holder and pivot down.
Press to lock in position.
Cup holders MUST be opened to access belt
path during rear facing installation of child
restraint. Cup holders may be collapsed down
against vehicle belt after belt installation.
DO NOT place glass or metal containers or hard
or sharp objects in cup holder. In a crash they
could cause serious injury.
28 EXEC instructions
™
door. Pull
™
1
1
2
2
1
2
3
4
5
6
EXEC instructions
™
29