Advertisement
SPECIFICATIONS
Model
Voltage (by areas)*
Power Input
No-load speed
Full-load impact rate
Capacity: concrete
steel
wood
Weight (without cord and side handle)
Function
*Be sure to check the nameplate on product as it is subject to change by areas.
STANDARD ACCESSORIES
(1) Case (Molded plastic) ................................................ 1
(2) Side handle ................................................................ 1
(3) Stopper ........................................................................ 1
(4) Dust cup ...................................................................... 1
(5) Syringe ........................................................................ 1
OPTIONAL ACCESSORIES (sold separately)
1. Drilling anchor holes (rotation + striking)
Drill bit (Taper shank) and taper shank adapter
Drill bit (Taper shank)
Outer diameter
11.0 mm
12.3 mm
12.7 mm
14.3 mm
14.5 mm
17.5 mm
21.5 mm
DH30PB
4.7 kg
Rotation + Striking
Rotation only
Standard accessories are subject to change without
notice.
Taper shank adapter
(SDS-plus shank)
Cotter
Taper mode
Morse taper (No.1)
Morse taper (No.2)
A-taper
B-taper
110V
50/60 Hz
770 W*
0 – 850/min
0 – 3700/min
4 – 30 mm
13 mm
32 mm
Rotation + Striking
Applicable drill bit
Drill bit (taper shank)
Drill bit (taper shank)
Taper shank adapter formed A-taper or B-taper
is provided as an optional accessory, but the
drill bit for it is not provided.
DH30PC
4.8 kg
Rotation only
Striking only
11.0 ~ 17.5 mm
21.5 mm
6
Advertisement
