To Replace The Top Covers - Husqvarna AUTOMOWER 535 AWD Operator's Manual

5. Remove the 3 screws. Use a manual
straight slot or cross-tip screwdriver.
6. Remove each blade and screw.
7. Fasten new blades and screws.
8. Check that the blades can pivot freely.

5.4 To replace the top covers

The top cover is an accessory available in
different colors. Speak to your local Husqvarna
representative for more information.
CAUTION: Clean grass and dirt from
the product before you remove the
covers.
5.4.1 To remove the front top cover
1. Switch off the product. Refer to
the product on page 33 .
2. Remove the front top cover from the snap-
on clips on the product.
1427 - 002 - 20.12.2019
3. Lift the front top cover.
To switch off
5.4.2 To install the front top cover
1. Put the front top cover on the snap-on clips.
Maintenance - 37