To Replace The Top Covers - Husqvarna Automower 535 AWD Operator's Manual

6. Remove each blade and screw.
7. Fasten new blades and screws.
8. Check that the blades can pivot freely.

5.4 To replace the top covers

If the top covers are damaged, you must replace
them.
CAUTION: Clean grass and dirt from
the product before you remove the
covers.
5.4.1 To remove the front top cover
1. Push the On/Off button to switch off the
product. Make sure that the LED status
indicator goes off.
30 - Maintenance
2. The top cover is attached to the body by
clips. Pull the top cover up by your hands
and remove it.
3. Lift up the top cover.
5.4.2 To install the front top cover
1. Put the front top cover on the snap-on clips.
1055 - 001 - 04.02.2019