Husqvarna AUTOMOWER 535 AWD Operator's Manual page 47

Message Cause
Weak GPS signal
The sky is obstructed in large parts of
the work area.
Collision sensor
A blockage has caused the product to
problem, front/rear stop.
The body of the product cannot move
freely around the chassis.
The body of the product is not installed
correctly in the rubber dampers.
1427 - 002 - 20.12.2019
Action
If possible, remove obstructing objects.
Disable the GPS navigation function
and use the lawn coverage function in-
Lawn coverage on page
stead. Refer to
29 .
Remove the product from the blockage
and examine the cause of the stop.
Remove dirt and unwanted material be-
tween the chassis and the body to
make sure that the body of the product
can move freely around the chassis.
Make sure that the rubber dampers are
attached correctly in the body of the
product and in the chassis.
Troubleshooting - 47