To Replace The Top Covers - Husqvarna AUTOMOWER 535 AWD Operator's Manual

5. Remove the 5 screws.
6. Remove each blade and screw.
7. Install new blades and screws.
8. Make sure that the blades can pivot freely.

6.5 To replace the top covers

The top cover is an accessory available in different
colors. Speak to your local Husqvarna representative for
more information.
CAUTION:
Clean grass and dirt from
the product before you remove the covers.
1427 - 009 - 20.12.2022
6.5.1 To remove the front top cover
1. Set the product to OFF. Refer to
to OFF on page 27 .
2. Remove the front top cover from the snap-on clips
on the product.
3. Lift the front top cover.
6.5.2 To install the front top cover
1. Put the front top cover on the snap-on clips.
To set the product
Maintenance - 31