Husqvarna AUTOMOWER 535 AWD Operator's Manual page 43

Message Cause
Cutting system
Grass or other object has wrapped
blocked
around the blade disc.
The blade disc lies in a pool of water.
Message Cause
Trapped
The product is stuck in a small area be-
hind a number of obstacles.
Wrong PIN code
Wrong PIN code has been entered.
Five attempts are permitted, and the
product is then blocked for a period of
time.
Empty battery
The product cannot find the charging
station.
The battery is spent.
The charging station's antenna is de-
fective.
No drive The product is caught in something and
has been slipping.
The work area includes a steep slope.
The guide wire is not installed correctly
in a slope.
Wheel motor over-
The product is caught in something.
loaded
1427 - 002 - 20.12.2019
Action
Examine the blade disc and remove the
grass or other object.
Move the product and prevent the col-
lection of water in the work area.
Action
Examine if there are any obstacles
which make it hard for the product to
move away from this location.
Enter the correct PIN code. If the PIN
code is incorrect, use the link in the app
to send the PIN code to your registered
e-mail address. If you have not regis-
tered the e-mail address, contact your
local Husqvarna representative.
Change the position of the guide wire.
Refer to To install the guide wire on
page 23 .
Check the installation settings about
how to find the charging station. Refer
To find the charging station on page
to
28 .
Replace the battery. Refer to
on page 39 .
Check if the indicator lamp in the
charging station flashes red. Refer to
Indicator lamp in the charging station
on page 49 .
Free the product and rectify the reason
for the lack of drive. If it is due to wet
grass, wait until the lawn has dried be-
fore using the product.
Maximum guaranteed slope is 70%.
Steeper slopes should be isolated. Re-
To put the boundary wire in a
fer to
slope on page 19 .
Make sure that the guide wire is instal-
led diagonally across the slope. Refer
To install the guide wire on page 23 .
to
Free the product and rectify the reason
for the lack of drive. If it is due to wet
grass, wait until the lawn has dried be-
fore using the product.
Troubleshooting - 43
Battery