Promac SX-818DV Operating Instructions Manual page 15

You can move the spring UP or down
UP-for auto cutting
Down-for manual cutting
1
7
Main Switch
1
Power light
2
Auto Cutting
Turn the switch to 3, push (8) the handle of limit switch.
3
The machine will going down and cut by itself.
Adjust No. 6 to set down-feed speed in sawframe.
Manual Cutting
Turn the switch to 4, push (8) the handle of limit switch.
4
It convert into the manual cutting.
Adjust the spring and No. 6 to tmanual operation.
Fast Moving Sawframe to approach Cutting Material
5
Turn the switch to 5, push (8) the handle of limit switch.
It can move sawframe manually to near cutting material.
Down-feed speed can adjustable.
6
Select saw blade speed
7
Emergency switch
8
2
3
4
5
6
description
8