Table of Contents
Advertisement
Installation guide | Remote VLT® Control Panel LCP 601 and
Mounting Kit
The remote LCP can be safely connected or removed while the soft starter is running. It is not necessary to remove mains or
control voltage.
If parameter 1A Command Source is set to Remote LCP, removing the remote LCP causes a trip.
2.4 Mounting Diagram
Drill 4 mounting holes for screws (1 in each corner) and 2 holes for the DB9 connector.
The image is not to scale. Dimensions are given with the faceplate removed.
Danfoss A/S © 2018.06
N O T I C E
N O T I C E
N O T I C E
Installation
AN265232431650en-000101 / 175R1177 | 5
Advertisement
Table of Contents
Need help?
Do you have a question about the VLT LCP 601 and is the answer not in the manual?
Questions and answers