Advertisement
Setup
1.
Connect the power adapter to the power
jack
on the back of the instrument base
and plug the cord into an outlet.
2.
Plug the wireless mouse receiver into one
of the USB ports
side of the LCD screen. Install the battery
and switch ON the mouse.
3.
Optional: If the instrument is equipped with
a mechanical stage, install the mechanical
stage following the instructions provided in
the user guide.
4.
Unpack the glass stage plate
it into the stage opening (if a mechanical
stage is installed, move it all the way back
to expose the stage opening).
5.
Switch the instrument ON using the
power switch
instrument. Startup takes approximately
one minute. If the display remains black
after startup, adjust the illumination.
Note: For detailed setup instructions,
refer to the EVOS
System User Guide.
located on the right
and insert
on the right side of the
XL Core Imaging
™
3
Advertisement
