Statistics; Extended Diagnostics On Events Change - Procentec ProfiHub B2FOR+ User Manual

3.3.2 Statistics

You can choose which Statistics can trigger a diagnostic message, because not all statistics are interesting in all
networks. For example, Syncs have been disabled by default because this is not a statistic that is suitable for
PROFIBUS health monitoring.
Fig. 22 – You can choose which statistics trigger a diagnostic message
The following Statistics can trigger a diagnostic message of the Diagnostic Device:
• Lost changed
• Sync changed
• Repeats (total) changed
• Repeats (max) changed

3.3.3 Extended Diagnostics on Events change

For more critical applications you can choose to enable the 'Extended Diagnostics' option for each of the
previously mentioned events. In the case of such an event, the Diagnostics Device will send out a diagnostics
message with the 'Extended Diagnostic' bit on. In a Busmonitor tool such as ProfiTrace the extended
diagnostics bit will appear as a red blinking square.
All Events described in paragraph 3.3.1 can trigger the Extended Diagnostic bit of the Diagnostic Device. By
default, the Extended Diagnostic option is disabled. Each item can be enabled individually.
ProfiHub B2FOR+ / B4FOR+ User Manual | August 2019 | © PROCENTEC
• Illegals changed
• Internal Diagnostics changed
• External Diagnostics changed
• Diagnostics in Data Exchange changed
35/60