2 Installation Instructions ProfiHub B2FOR+ / B4FOR+
2.1 Location
The ProfiHub can be installed everywhere in a non-hazardous area that complies with IP 20 (DIN 40 050) and
the specified temperature range of -25 to +70
o
Celsius.
2.2 Position
The ProfiHub can be installed in every position, but it is recommended to install it with the cables pointing
down. In this position it is also easier to read the status LEDs.
2.3 Mounting
The ProfiHub can be mounted on 35 mm DIN-rail with a minimum width of 167 mm. The ProfiHub B2FOR+ /
B4FOR+ has only been UL approved with 35 mm DIN-rail mounting!
The supplied rubber studs need to be placed on the back of the housing of the ProfiHub B2FOR+ / B4FOR+ for
extra fixation. This is to prevent the product to potentially slide off the DIN-rail. See Fig. 9 for an example.
Fig. 9 – Rubber studs on backside of housing
ProfiHub B2FOR+ / B4FOR+ User Manual | August 2019 | © PROCENTEC
16/60