Honda 08V31-T7A-100 Installation Instructions Manual page 12

With Another Accessory Harness
27. Route the fog light harness as shown.
FOG LIGHT
HARNESS
FRONT
BUMPER
BEAM
LONG
WIRE TIE
FOG LIGHT
HARNESS
FOG LIGHT HARNESS
2-PIN CONNECTOR
28. Using diagonal cutters, cut off the fog light harness
clip.
NOTE: Be careful not to damage the fog light
harness.
29. Secure the fog light harness to the other accessory
harness with one long wire tie as shown.
12 of 19
FOG LIGHT
HARNESS CLIP
(Cut off.)
OTHER
ACCESSORY
HRNESS
520 mm
(20.47 in.)
30. Secure the fog light harness to the vehicle harness
with one wire tie and one long wire tie as shown.
FRONT
BUMPER
BEAM
LONG
WIRE TIE
31. Connect two long wire ties together, and secure the
fog light harness to the front bumper beam with
them.
2 LONG
WIRE TIES
(Joint.)
AII12705-21 (1911)
VEHICLE
HARNESS
FOG LIGHT
WIRE TIE
HARNESS
JOINTED
LONG
FRONT
WIRE TIE
BUMPER
BEAM
© 2019 American Honda Motor Co., Inc. – All Rights Reserved.
FRONT
BUMPER
BEAM
FOG
LIGHT
HARNESS