Honda 08V31-T7A-100 Installation Instructions Manual page 11

23. Secure the fog light harness clip to the hole in the
vehicle frame as shown.
FOG LIGHT
HARNESS CLIP
If the vehicle is equipped with another accessory
harness, go to step 27; otherwise, continue with
step 24.
Without Another Accessory Harness
24. Route the fog light harness as shown. Secure the fog
light harness clip to the hole in the vehicle frame as
shown.
FRONT
BUMPER
FOG LIGHT
BEAM
HARNESS CLIP
© 2019 American Honda Motor Co., Inc. – All Rights Reserved.
FRONT
VEHICLE
BUMPER
FRAME
BEAM
FOG LIGHT
HARNESS
QD42011AH
VEHICLE
FRAME
FOG LIGHT
HARNESS
25. Secure the fog light harness to the vehicle harness
with one wire tie.
FRONT
BUMPER
BEAM
26. Connect two long wire ties together, and secure the
fog light harness to the front bumper beam with
them. Go to step 32.
2 LONG
WIRE TIES
(Joint.)
AII12705-21 (1911)
VEHICLE
HARNESS
WIRE TIE
FOG LIGHT
HARNESS
2 JOINTED
LONG
FRONT
WIRE TIES
BUMPER
BEAM
FRONT
BUMPER
BEAM
FOG
LIGHT
HARNESS
QD42014AH
11 of 19