Table of Contents
Advertisement
Removal and Replacement Procedures
Flexible Diskette Drive
To remove the flexible diskette drive:
1. Complete the preparation procedures. Refer to "Preparation Procedures" earlier in this
chapter.
2. Open the bezel door. Refer to "Bezel Door" earlier in this chapter.
3. Press the two release tabs of the rails inward and slide the drive out far enough to expose
the connectors.
4. Disconnect the power and signal cable connectors.
5. Hold the drive by its sides and gently slide the drive out of the drive bay.
Figure 2-15: Removing the flexible diskette drive
2-18
HP CONFIDENTIAL Codename: Stone Soup 2 Part Number: 368148-003 Last Saved On: 6/10/05 4:28 PM
HP ProLiant ML150 Generation 2 Server Maintenance and Service Guide
Advertisement
Table of Contents
